|
NON SILICONE DEFOAMER
DeCAL 5011 is a complex mixture of oils and low foam emulsifiers. It does not contain silicone oil or alkyl phenol ethoxylates. DeCAL 5011 exhibits excellent stability to both shear and temperature. DeCAL 5011 is a more effective version of DeCAL 5010 for use in demanding applications.
1. Typical Properties:
- Activity - 100%
- Physical form - Pale yellow liquid
- pH diluted with water - 7 - 8
- Ionic character - Nonionic
- Predilution - Emulsifies readily with water
2. Application: DeCAL 5011 is a non silicone based product which has stability in high temperature equipment. DeCAL 5011 dispersibility in the process liquor should be checked in-situ before use.
3. Dosage: Normally 0.5g per litre addition of DeCAL 5011, as supplied, is sufficient for most defoaming applications.
4. Advantages:
- 100% active, does not contain water.
- Salt stable (to 100g 1-1). Hydrogen peroxide / Caustic stable (add DeCAL 5011 first)
- Shear stable therefore suitable for jets with high jet nozzle pressure.
- High temperature stability (130C or above). Superb emulsion forming characteristics on contact with water. An instant white emulsion is formed on addition to water
5. Packaging Available in 170kg nett plastic drums or 850kg nett IBC’s. Other pack sizes can be made available on request.
6. Handling precautions The usual precautions in handling chemicals should be observed, and it is recommended that operatives should wear goggles and gloves when handling the concentrated product. Any contact with skin and eyes should be washed immediately with copious amounts of cold water. Please refer to Health & Safety Data Sheet for further information. We hope this information will be of value and if necessary we will be glad to offer additional technical advice. Please note that all our information is given in good faith, we can assume no responsibility for any liability incurred. Data and results should be confirmed by the Buyer by testing the product under its intended conditions of use. Version 0.0. 27.10.03
|
